Belfort Instrument logo The Standard of Measurement
Homepage
About Belfort
News
Belfort Blog
Meteorological Sensors
Store
Aviation Systems
Kelly Cole, Ralph Petragnani, Bruce R. Robinson, Nicholas C. Kaufman, Debra S. Alascio, Belfort Instrument, Weather, ASOS, AWOS, Digiwx
Installations
Military and Industrial
Customer Services
Reference Library
727 South Wolfe Street
Baltimore, MD 21231
Tel.: (410) 342-2626
Fax: (410) 342-7028

Crane Alarm

DESIGNED TO MONITOR WIND LOADS ON CRANES AND WARN OF
UNSAFE OPERATING CONDITIONS
USES LATEST MAINTENANCE FREE ULTRASONIC WIND SPEED SENSING TECHNOLOGY
DESIGNED AND CONSTRUCTED FOR USE IN SEVERE ENVIRONMENTS
SELECTABLE ALARM THRESHOLDS
PRE-ALARM DELAY MINIMIZES FALSE ALARM DUE TO SHORT TERM GUSTS
TEST SWITCH PROVIDES QUICK CHECK OF LIGHT, ALARM AND
EXTERNAL CONTROL RELAY

Specifications | PDF

Crane AlarmOSHA Regulations for maritime construction and general industry require each rail mounted bridge and portal crane located outside an enclosed structure to be fitted with an operable wind indicating device. The Belfort Model 6115 crane wind alarm system meets these requirements.

Wind speed is detected by the latest technology ultrasonic sensor Belfort Model 6115 mounted on the crane or nearby structure. The sensor provides an output voltage proportional to the wind speed to a cab mounted alarm console. The wind alarm console provides:

  • Digital Wind Speed Indicator
  • Low Limit Warning Light
  • High Limit Warning Light
  • Red Caution Light
  • Stop Operation Horn
  • High and Low Limit Test Switch

A built-in time delay, variable from 00-40 seconds can be set to prevent very short duration gusts from causing false alarms. In the event an alarm occurs, the operate-with- Caution red light begins to flash. Then, if the preset Danger level is reached, the stop-operation horn will blow, telling the crane operator to secure the crane, stop operation and seek shelter. If additional connections are made, the alarm can cause a remote warning light to flash, sound a remote horn or siren, and automatically actuate the crane brakes to prevent the crane from rolling.

 

Specifications

Range: 0-120mph (0-53 m/sec.)
Accuracy: +/- 2%
Starting Threshold: 2 mph
Outputs: Analog + DPDT Relay
Contact Rating: 20 amps
Pre-Alarm Delay: 0 – 40 sec
Power Requirements: 120VAC@ < 1amp
Dimensions:(Consolet Only): 7.5”H x 8.5”W x 7.5”D -(19 x 21.6 x 19cm)
Weight (Consolet Only): 9 lbs. (4 kg)
Shipping Weight: 14 lbs.

 

Get Adobe Acrobat Reader You will need Adobe Acrobat Reader to view the Press Releases.
Click here
for a free download.
 
PDF File UltraSonic Crane Wind Alarm

 

©2012, Belfort Instruments, All rights reserved | Site designed by: The Canton Group